|
|
产品简介 | |||||||||||||||||||||||||||
莱克生产的进口疏水阀,驱动方式可选用自动,连接方式可选用法兰、焊接、内螺纹,结构形式可选用硬密封,密封结构可选用,压力范围PN0MPa-100MPa,公称通径为15-500mm,材质可选用不锈钢(304、316、316L)、铸钢。由于阀门的使用范围非常的广泛,同一种阀门在不同的场合与工况有不同的搭配,如果您是非专业人士,欢迎您向本公司来电咨询。本公司有专业技术人员为您服务!技术部电话:13826088101 | |||||||||||||||||||||||||||
产品详情 | |||||||||||||||||||||||||||
| |||||||||||||||||||||||||||
Main Basis for Type Selection: ■ Condensation water loading (discharge)kg/h (select the multiplying power 2~3 times). ■ Maximum working pressure Mpa ■ Operation pressure differential ■ Valve material and nominal pressure ■ Connection mode and dimension | |||||||||||||||||||||||||||
Use and Maintenance: ■ Confirm the valve material, pressure and check if the maximum is suitable for operation condition. ■ Before installation, clean the pipeline and clear away sundries. ■ The installation position shall be closed to heating equipment as much as possible. ■ Install the minimum point of pipe horizontally and the direction of flow should be the same to the label of valve. ■ Install steam trap for each heating equipment in case cause influence each other. ■ under the safe operation of system, open the valve in front of the steam trap, make it rise up to normal station slowly. ■ Do time-based maintenance for the normal working of steam trap |
进口疏水阀
进口蒸汽疏水阀
进口高温高压疏水阀
进口浮球式疏水阀
进口自由式疏水阀
进口双金属疏水阀
进口倒吊桶式疏水阀
进口圆盘式疏水阀
进口气体疏水阀
进口内螺纹疏水阀
进口膜盒式疏水阀
进口波纹管式疏水阀
进口热动力式疏水阀
进口汽水分离器
进口气动疏水阀
| ||||
| ||||
| ||||
| ||||
| ||||
| ||||
| ||||
|